Edimax Technology BR-6624 - Manual (Page 41)

Settings – Special Applications
Special Application
Configuration
• Enable – Use this to Enable or Disable this Special Application as
required.
• Name – Enter a descriptive name to identify this Special
Application.
• Outgoing Protocol –Select the protocol used by this application,
when sending data to the remote server or PC.
• Outgoing Port Range – Enter the beginning and end of the range
of port numbers used by the application server, for data you send. If
the application uses a single port number, enter it in both fields
• Incoming Protocol – Select the protocol used by this application,
when receiving data from the remote server or PC.
• Incoming Port Range – Enter the beginning and end of the range
of port numbers used by the application server, for data you
receive. If the application uses a single port number, enter it in both
fields.
Special Application
List This shows details of all Special Applications which are currently
defined.
Using a Special Application on your PC
• Once
the Special Applications screen is configured correctly, you can use the application on your
PC normally. Remember that only one (1) PC can use each Special application at any time.
• Also, when 1 PC is finished using a particular Special Application, there may need to be a "Time-
out" period before another PC can use the same Special Application.
• If an application still cannot function correctly, try using the "DMZ" feature, if possible.
Page 37