Edimax Technology BR-6624 - Manual (Page 61)

Data – Policy Configuration.
Policy Priority
• Policy Name –The name of a policy which is used to classify the received
packets based on the following types for your memory.
• Source/Destination Address, Port – Specify a packet based on
source/destination address or port. Address has two types: IP address and
MAC address. By default, the IP address is 0.0.0.0 for all IP Addresses but
the MAC address is 00-00-00-00-00-00 which cannot be used to classify.
Port and Protocol Type define all packets for special applications.
• Protocol Type – The field defines traffic packet type, i.e. IP,TCP and UDP.
• Priority Queue –This device supports four queues. When a packet meets a
policy rule requirement, it will be put into the responding queue. Otherwise it is
assigned the lowest priority to pass through
Page 57