Edimax Technology BR-6624 - Manual (Page 71)

Restore Factory Defaults
When the "Restore Factory Defaults" button on the upgrade Firmware screen above is clicked, the
following screen is displayed.
Figure 7-7: Restore Factory Defaults
If the "Restore Default Value" button on this screen is clicked:
• ALL of your settings will be erased.
• The default IP address, password and ALL other settings will be restored to the factory default
values.
• The DCHP server function will be enabled.
These changes may mean that the current connection is invalid, and you will have to re-connect to
The Load Balancer using its default IP address (192.168.1.1).
Page 67