Configuring the load balancer for internet access – Edimax Technology BR-6624 User Manual
Page 17
Advertising
• For each PC connected to the LAN ports, the corresponding LAN LED (either 10 or 100)
should be ON.
3. Configuring The Load Balancer for Internet Access
Select Primary Setup from the menu, to see a screen like the example below.
• Configure WAN 1 and/or WAN 2 as required.
• For any of the following situations, refer to Chapter 3: Advanced Port Setup for any further
configuration, which may be required.
• Using
both
ports
• Multiple IP addresses on either port
• Multiple PPPoE sessions
• PPTP connection method
Figure 2-5: Primary Setup
Page 13
Advertising