Edimax Technology BR-6624 - Manual (Page 27)

Settings – Load Balance
Load Balance
Configuration
• Enable – This will allow you enable or disable the load-balancing feature.
• Load Balancing Base On – Select the desired option to measure the traffic
load.
1. Bytes Tx + Rx: The link with the least number of bytes transmitted
through the WAN port.
2. Packets Tx + Rx: The link with the least number of packets
transmitted through the WAN port.
3. Sessions Established: The link with the least number of sessions
built on the WAN port.
4. IP Addresses: The link with the least number of Host IP addresses
built on the WAN port.
• Loading Share –Enter the desired percent of traffic load for each WAN port
NAT
Statistics This section displays the current data about WAN 1 and WAN 2. You can use this
information to help you "fine-tune" the settings above.
Interface
Statistics This section displays cumulative statistics.
Use the "Restart Counters" button to restart these counters when required.
Page 23