Edimax Technology BR-6624 - Manual (Page 39)

Settings – Virtual Server
Virtual Server
Configuration
• Enable – To activate or deactivate the current entry.
• Server Name – A unique name for identifying the virtual server.
• Protocol – Select the protocol (either TCP or UDP) used by the server
software.
• IP Address – LAN: Enter the IP address of the server on the device's LAN
side. The hosts used as Virtual Servers need static IP addresses or reserved
IP addresses. WAN: The WAN port that the virtual server is bound on.
• Port Range – LAN: The range of port numbers used by the server. If only
one port number is used, fill the same number in both starting and ending
fields. WAN: The range of port numbers for users in public to access the
virtual server. If only one port number is used, fill the same number in both
starting and ending fields.
• Allowed Remote IP –The range of IP addresses that are allowed to access
the virtual server.
Virtual Server
List The Virtual Server List shows details of all Virtual Servers which have been
defined.
Page 35