Edimax Technology AR-7265WnB - Manual (Page 11)

3
1.2. Minimum Requirements
The following devices are necessary to configure and use the ADSL2+ Router：
• A PC with Pre-installed Ethernet Adapter (Required) and a Web-Browser
(Internet Explorer 4.0 or higher)
• RJ-45 Ethernet crossover cable (Included in the package)
• RJ-11 (ADSL Ready) phone Line
1.3. Package Content
• One ADSL2/2+ Router (Annex A or B)
• 3dBi Antennas x 3
• One 12V Power Adapter
• One RJ-45 Ethernet Cable (100 cm)
• One RJ-11 Telephone Line (180 cm)
• One Quick Installation Guide
• One CD with Setup Wizard ,Multi-languages QIG and User Manual
• Holding Base
Notice：
To improve wireless signal reception, please arrange the antennas as the picture
shown below (horizontal or vertical installation), and place the wireless access
point in open space. Please keep the distance between antennas, if the antennas
are too close to each other, wireless signal reception will be affected.
or