Edimax Technology AR-7265WnB - Manual (Page 52)

44
Parameter Description
Start Port Number Enter the start port number.
End Port Number Enter the end port number.
Local IP Address It is recommended to enter a static IP Address for the
server here. If the server’s IP Address is obtained from
DHCP Server, the IP Address may be changed
dynamically and will cause problem on this feature.
Please assign a static IP Address to the server and make
sure that the IP Address is not in the range of IP
Addresses that the DHCP Server will assign.
5.3.4. ADSL
Parameter Description
ADSL Mode The default setting is “Auto Sync-Up”. This mode will
automatically detect the ADSL mode including ADSL2+,
ADSL2, G.DMT, T1.413 and G.lite. If you are not sure
how to select the ADSL mode, please contact with your
ISP.
ADSL Type Check with your ISP about the ADSL type of the DSLAM
device they use.