Edimax Technology AR-7265WnB - Manual (Page 28)

20
Access Management (Section 5.4)
It allows you to configure ACL, IP Filter, SNMP, UPnP and DDNS functions.
Maintenance (Section 5.5)
If you want to change the administrator’s password, restart the router, update the
firmware, diagnose the connection or change the Tome Zone of the router,
please select this menu.
Status (Section 5.6)
The router’s setup information, system log and some statistics can be viewed
here.
Help
If you want to know about the settings of the router quickly, please refer to the
description in the Help menu.
5.1. Quick Start
The Quick Start section is designed to get you using the router as quickly as
possible. Before configuring the router, please check with your ISP (Internet
Service Provider) what kind of the service is provided such as PPPoE, PPPoA or
RFC1483/2684. Gather the information as illustrated in the following table and
keep it for reference.
PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password (and Service Name).
PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password.
RFC1483 Bridged VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
Mode.
RFC1483 Routed VPI/VCI, VC-based/LLC-based multiplexing, IP Address,
Subnet Mask, Gateway Address, and Domain Name
System (DNS) IP Address (It is a fixed IP Address).