Edimax Technology AR-7265WnB - Manual (Page 56)

48
z IP / MAC Filter Rule Editing
Parameter Description
IP/MAC Filter Rule
Index
This is the item number to record the setting rule.
Rule Type Select to filter through the IP Address or MAC Address.
Active Select “Yes” to enable the current rule, select “No” to
cancel the current rule.
Source IP Address Enter the start IP Address which will be monitored. If
“0.0.0.0” is set, it means for any IP Address.
Subnet Mask Enter the Subnet Mask based on the Source IP Address.
Port Number LAN users use port number to distinguish one network
application over another such as 21 is for FTP service.
The port number range is from 0 to 65535. It is
recommended that this option be configured by an
advanced user.
Destination IP Address Enter the start IP Address which will be monitored. If
“0.0.0.0” is set, it means for any IP Address.
Subnet Mask Enter the Subnet Mask based on the Destination IP
Address.
Port Number This is the port or port ranges that define the application.
Protocol It is the packet protocol type used by the application.
Please select “TCP”, “UDP” or “ICMP”. For example, FTP
service, you have to select “TCP”.
MAC Address The MAC address (Media Access Control address) is a