Edimax Technology AR-7265WnB - Manual (Page 36)

28
please select “PPPoE LLC”, “PPPoE VC-Mux”, “PPPoA
LLC”, or “PPPoA VC-Mux”.
Bridge Interface This router built-in ADSL modem is able to connect to
ISP automatically. Alternatively, if you want to use the
dial up software to manually connect to the ISP, you
have to activate the ”Bridge Interface”.
Connection Always On – The connection will be kept always on. If
the connection is interrupted, the router will re-connect
automatically.
Connect On-Demand – Only connect when you want to
surf the Internet. “Close if idle for xx minutes” is set to
stop the connection when the network traffic is not
sending or receiving after an idle time.
Connect Manually – After you have selected this option,
please go to Status page. You will see the “Connect”
button, click it and the router will connect to the ISP. If
y o u w a n t t o s t o p t h e c o n n e c t i o n , p l e a s e c l i c k
“Disconnect” button.
TCP MSS Option The “TCP MSS Option” enables the configuration of the
maximum segment size (MSS) for transient packets that
traverse a router, specifically TCP segments in the SYN
bit set, when PPPoE is being used in the network. Please
specify the MSS range from 100 to 1452 bytes or 0 byte
as the default value.