Edimax Technology AR-7265WnB User Manual
Page 24
16
8. Reboot the PC. Your PC will now obtain an IP address automatically from
your router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.
Windows NT
1. Click
the
Start button and select Settings, then click Control Panel. The
Control Panel window will appear.
2. Double-click
Network icon. The Network window will appear. Select the
Protocol tab from the Network window.
3. Check
if
the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is
not installed, click the Add button to install it now. If TCP/IP is installed, go to
step 5.
4. In
the
Select Network Protocol window, select the TCP/IP Protocol and click
the Ok button to start installing the TCP/IP protocol. You may need your
Windows CD to complete the installation.