Edimax Technology AR-7265WnB - Manual (Page 25)

17
5. After you install TCP/IP, go back to the Network window. Select TCP/IP from
the list of Network Protocols and then click the Properties button.
6. Check each of the tabs and verify the following settings:
IP Address: Select Obtain an IP address from a DHCP server.
DNS: Let all fields are blank.
WINS: Let all fields are blank.
Routing: Let all fields are blank.
7. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router’s DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP
server available on your LAN.