Swarovski Optik CTS - Manual (Page 9)

17
DE
16
DE EN EN
in order to reach best possible focusing, please
proceed as follows:
• Turn the ocular for focusing completely to the left
(anti-clockwise).
• Now turn the ocular to the right (clockwise) until
you reach sharpest image.
• When using the variable 20-60x eyepiece, the
focusing should be made with the highest magni-
fication.
adjustment of the screw-in-type eye cup
Use without eyeglasses:
turn the eye cup anti-
clockwise until it stops.
Use with eyeglasses:
turn the eye cup clockwise
until it stops.
mounting the telescope on the tripod
the tripod base has a con-
necting thread of
3 /
8
˝ UNC.
the inserted bush reduces
the connecting thread to
1 /
4
˝. the observation tele-
scope thus fits on any stan-
dard tripod.
after use of the telescope
• Close it until stop.
• Close the lens cap and eyepiece cap again.
• In order to protect the cover glass in the bayonet
fitting, leave the eyepiece mounted and protect it
by putting on its protective cap or close the bayo-
net fitting with the cover provided for this purpose.
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres. it
is suitable for objective lens, ocular lens and eye-
glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. if the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens surfaces!
cleaning
on account of the functional principle of all
exten-dable telescopes from any manufacturer, an
exten-dable telescope never can be tight. When
1/4”