Candy FPC 825 AL - Manual (Page 12)

USING THE MINUTE TIMER
To set the cooking time, turn dial one complete revolution and
then position the index to the required time. When the time has la-
psed, the signal will ring for a few seconds.
.
USING THE END OF COOKING TIMER
This control enables to set the desired cooking time (max. 120
min.) the oven will automatically switch off at the end of the set ti-
me.
The timer will count down from the set time return to the O posi-
tion and switch off automatically.
For normal use of oven set the timer to the position.
Note. The end of cooking timer also act as general switch. To set the oven ensure the timer is
not on the O position.
21 GB
22
TO OPERATE THE ELECTRONIC CLOCK-PROGRAMMER
Preliminary Operations to Perform
After Plugging-in the Oven.
After initially plugging-in the unit, and after each interruption in
power, the lighted display on the control panel will respond by
flashing «AUTO»
Press the TIMER and END buttons along with the or
buttons to set the exact time.
When the symbol appears on the display, the oven is
ready to be used manually.
Available Functions
— Manual operation
— Timed operation
— Semi-automatic operation (programmed end to the cooking time)
— Automatic operation (programmed beginning and end of cooking time)
Manual Operation (of the oven):
This has already been described in the section of PRELIMINARY OPERATIONS. Just press
the button to make the corresponding symbol appear in the center and remove the AUTO
indicator.
Using the Electronic Programmer
As described in the PRELIMINARY OPERATIONS section, the electronic programmer allows the
oven to be operated manually or by:
— The timer;
— Programming the end of the cooking time (semi-automatic operation);
— Programming the beginning and end of the cooking time (automatic operation).
Using the Timer
While pressing the button, use the and buttons to select the desired time (23:59
maximum). Setting the desired time will light the symbol. (Note: This function can be used
either as a manual function or automatic along with another program).
At the end of the set time the programmer sounds an interminent signal, to cancel the signal
press . While cooking, to display the time remaining press .
Adjusting the Tone of the Timer Signal
Three different tones are available on the acoustic timer signal. To choose the bone desired,
press the button while the signal is sounding.
GB