1 what is in your order, 2 checking the equipment you’ll need, 3 unpacking – Accusys ExaSAN B08S2-PS User Manual

Page 17: 3 what’s in the box, 1 b08s2-ps system, 2 b08s2-ps accessories, What is in your order, Checking the equipment you’ll need, Unpacking, What’s in the box

Advertising
background image

1. Introduction

User Guide

Page 1-7

Figure 6: B08S2-PS packing list

1.2.1 What Is In Your Order

Your ExaSAN System Integrator/Value Added Reseller should have helped you assess, identify, and
order all necessary system components and accessories, not included in the B08S2-PS packaging. If you
ordered the complete B08S2-PS system solution, your order includes everything described in Section 1.3.

There are generic system components and accessories required by the ExaSAN solution but not included.
Please refer to Section 1.5, “What Else You Need” for additional information.

1.2.2 Checking the Equipment you’ll need

Section 1.1.3 has a complete list of all the equipment you’ll need to set up the ExaSAN B08S2-PS. Check
carefully against that list; verify that you have all of the system components and accessories before
commencing hardware installation.

1.2.3 Unpacking

Follow the steps below to open the carton and remove the system from its packaging. .
1. Read Chapter 2, “Preparing to Install ExaSAN B08S2-PS.”
2. Remove any packing material on the outside of the carton.
3. Cut the tape at the top of the carton. If you use a long cutting instrument, exercise care to avoid

damaging the content inside.

4. Open up the top flaps of the carton to reveal the content inside. Remove the protective foam on top of

the system. Carefully remove each item from inside the carton.

1.3 What’s in the Box

Carefully check your carton contents against the included packing list, or the inside flap of the box, and
your original purchase order. You should have the items as described in the sections below.

Contact your Accusys System Integrator/Value Added Reseller or Accusys Customer Service (see
Appendix C “Customer Service and Technical Support” for more information) to report any missing item.

1.3.1 B08S2-PS System

Your ExaSAN RAID disk system carton contains the following items:
1. PCIe 2.0 RAID disk system - B08S2-PS (x1)
2. Accessories package (x1)
3. Disk tray package (x1)

1.3.2 B08S2-PS Accessories

The Accessories package includes the following items. These items can also be ordered and shipped
separately from Accusys.
1. QSFP Host Bus Adapter (x1)
2. 2M QSFP copper cable (x1)
3. AC power cord (x1)
4. Installation DVD (x1)
5. Packing list (x1)
6. LP (Low profile) bracket (x1)
7. Screw pack (x1)

Advertising