Accusys ExaSAN B08S2-PS - Manual (Page 89)

4. How to Use
User Guide Page 4-38
1. Select the Split Shot function from the drop down menu.
2. Select the Cancel Scheduling radio button.
3. Select the required shot by clicking on the Shot No. radio button. From the respective drop down
menus, select the source volume and destination volume. Unavailable shots are grayed out.
4. Check the Confirm box and click OK to split the snapshot.
Figure 82: GUI “Snapshot setting 2/2”
Resynchronize Shot
Resynchronize the selected shot. This function can speed up mirroring for previous snapshots.
1. Select the Resynchronize shot function from the drop down menu.
2. Select the required shot by clicking on the Shot No. radio button. You can only select split shot for
resynchronization.
3. Check the Confirm box and click OK to split the snapshot.
Note
1. The destination volume must be equal or larger in size than the source
volume.
2. The source volume and the destination volume can be on different
arrays.
3. The destination volume must NOT be mapped to a LUN.
4. A shot will not be deleted if the details of the array change. The only
way to delete a shot is using the Delete Shot function under Snapshot.