Accusys ExaSAN B08S2-PS - Manual (Page 68)

4. How to Use
User Guide Page 4-17
Figure 55: GUI “Array tab”
Clicking the Drives radio button displays information about individual drives. Click on each drive image
to view the drive number, status (On-line or Failed), drive type (RAID or Spare), model, revision status
and capacity.
Figure 56: GUI “Drive tab”
Drives
Displays the overview of all drives for the selected controller.
Snapshot
The progress of the snapshot is displayed in the snapshot tab. To enable the snapshot function, see
Options > Snapshot.
Event
Displays a list of the most recent events. These events are automatically saved in RAIDGuard
X/Application/Log as .txt files.
4.1.2.5 Formatting and Mounting Arrays
After creating a RAID array on the ExaSAN RAID system, the array appears as an unformatted disk to
the host system. Use the host's disk management utility to format and mount the array for use.
Note
The following steps are for MAC users only. For PC users, consult with your
operating systems knowledge base on using the disk management utility to
format and mount arrays.