Accusys ExaSAN B08S2-PS - Manual (Page 69)

4. How to Use
User Guide Page 4-18
1. Restart the host system. In some instances, restarting the host system may not be necessary, but if you
are creating or adding arrays, you generally must restart before the arrays are visible in Disk Utility.
2. Open Disk Utility on the host system.
3. Select the array in the list at the left side of the window.
4. Click on the Erase tab.
5. Choose a format for the array from the Volume Format pop-up menu.
6. Type a name for the array.
7. Click Erase and confirm by clicking Erase again. Once formatting is complete, the array mounts on
the host system.
8. Repeat for each new array.
4.1.2.6 Email Notification Setting
It may be necessary for network administrators to receive e-mails in the event of errors, alerts, and
changes to the RAID array. These alerts can be e-mailed to a maximum of 20 e-mail addresses.
Mailing List
Enter the e-mail address(es) of people to receive controller error reports.
Click Remove to delete e-mail addresses from the list.
Click Send Test Email to check that the e-mail is working.
SMTP Setting
Mail Server Name – Enter the address of the mail server.
From Email Address – Enter the e-mail address of the mail server.
SMTP Server – requires authentication for user name and password
Check this box if your mail server requires a user name and password.
SMTP POST event
Check this box if wish to create a log for error events.
Note
Ask your systems administrator for SMTP Server details.