Acroprint TQ600 (software version 4.x and above) - Manual (Page 21)

15
5) Press [OK], the previous message continues to be displayed while
the template is created. If your identity cannot be verified, you are
prompted to try again and you must restart the verification procedure
(Refer to Step 2).
Testing a Fingerprint Enrollment
Ask the user to place their finger on the fingerprint sensor. If the test
was successful the enrollment is complete. If the terminal cannot read
the fingerprint or if several attempts are required for the terminal to
verify the fingerprint, the user should try 1:1 verification (refer to page
25).
Enrolling Auxiliary Fingerprints
It is a good practice to enroll at least two fingers for each user.
Press [MENU], select “User Manage”, press [OK], select “Enroll User”,
press [OK], select “Enroll FP”, press [OK], the following appears:
Press [ESC] to cancel the new enrollment, enter the User ID (PIN
number) of the user you wish to enroll an additional fingerprint for:
Backup Enroll
User ID 00001
ESC OK
Enroll FP
New Enroll?
ESC OK