Acroprint TQ600 (software version 4.x and above) - Manual (Page 38)

32
Set Date & Time
Select “Date Time”, press [OK] the following appears:
To change the date & time, input the correct date, press [▲/▼], enter
the time and press [OK].
Note: The time and date will update automatically when the
terminal is connected to the network.
Changing the Time Format
Select “12H or 24H”, press [OK], press [▲/▼] to change between 12
Hour and 24 Hour Format.
Changing the Language
Select “Language”, press [OK], press [▲/▼] to select the language (the
default language is English), press [OK].
Press [ESC] to exit system options. The system will prompt you to save
the setup, press [OK]. Restart the terminal for the language change to
take effect.
YYYY-MM-DD 24H
2008-01-02
08:24:35
ESC OK
System Opt ▼
Date Time
Time Fmt 12H
►Language ENG