Acroprint TQ600 (software version 4.x and above) - Manual (Page 46)

40
„ Alm SuperLog: An alarm will sound to alert the supervisor that
the logs are full. The set number is the remaining log capacity
before the logs are full, set from 0-99.
„ Alm AttLog: An alarm will sound when the logs are full. The set
number is the remaining log capacity before the logs are full, set
from 0-99.
„ ReCheck Min: Set the number of minutes before another punch
is accepted by the terminal. If a punch occurs within the ReCheck
Minutes, the punch will not be logged. This reduces duplicate
(accidental) punches.
Auto Test
Select “Auto Test”, press [OK], the following appears:
These options allow the testing of each portion of the terminal in order to
pinpoint failures.
WARNING: Do not disconnect or interrupt power while
performing any of the tests (loss of power during testing may
damage the hardware.
Auto Test ▼
►Run All Test
FLASH Test
LCD Test
----------------------------
Voice Test
FP Test
Key Test
RTC Test