Acroprint Time Q +Plus - Manual (Page 39)

39
12.3 Terminal diagnostics
The Time Clock terminal has a self-testing feature. The badge
reader, display, keyboard audio, printer and bell program can
be tested using a Supervisor’s badge. At the terminal:
1) Swipe the Supervisor badge.
2) Scroll up/down to “Test Features.”
3) Press ENTER.
4) Scroll menu to select test
5) Press ENTER and proceed as instructed.
TEST DESCRIPTIONS
Badge reader: This test will display the badge
number that is swiped through the
slot. This test may help identify a
defective badge.
Display: The display will scroll through the
various characters.
Keyboard: The display will show which key is
being pushed. Press clear twice to end
the test.
Audio: The internal speaker will beep at
graduated frequencies for this test.
Printer: Outputs a patterned character string to
the printer.
Bell: This test will ring a connected bell or
buzzer (see Companion products) to
ensure it is working properly. NOTE:
Setting a bell schedule is only
possible using the PC Interface
Program.
Programming the Time Clock terminal manually
IMPOR
T
ANT