Acroprint Time Q +Plus - Manual (Page 47)

47
CAN’T COMPLETE TASK
SELECT_PRINTER_TYPE
Generating a report when printer type is none.
CAN’T COMPLETE TASK
SUPERVISOR FOUND
Attempting to add a supervisor or employee badge to the clock that is
already programmed as a supervisor’s badge.
CAN’T COMPLETE TASK
TOO MANY WAITING
Attempted to submit a report when the report queue is full. Wait for
some of the reports to finish printing, then try again.
CAN’T COMPLETE TASK
TRY AGAIN PLEASE
Database access errors while attempting a transaction.
CRYSTAL/RTC TEST
FAIL:HANDSHAKE/INT
The real time clock and the crystal are tested by comparing them against
each other. This indicates a failure in the test.
DATA MAY BE CORRUPT
PRESS A KEY
This is caused by a power failure while writing to the database. Print all
reports if possible. Reinitialize the system if required.
DATABASE ACCESS ERROR
An internal database access error occurred.
LOCKED OUT
REPORT OLD DATA 1ST
Employee cannot clock in. The pay periods need to roll over first. Before
they can roll over, the data in the previous pay period must be printed. See
Section 9.3. Hours summary report. Printing report will allow employee(s)
to clock in.
Appendix B — Error messages at Time Clock terminal