Binatone NB-7703 - Manual (Page 6)

6
INSTRUCTIONS
Prepare food for chopping
1. Wash carefully all food.
2. Some vegetables and fruit have to be peeled.
Such are oranges, tangerines, lemons, mangos,
kiwis, melons, pineapples, etc.
3. If necessary, remove pits and stones (e.g.
from cherries, prunes, apricots, peaches, etc.) and pith (e.g.
from apples, pears, etc.).
4. Cut fruit and vegetables to pieces (approximately 3x3x3 cm).
Blender use
1. Place the blender jug (3) on the base (6) and turn it anti-
clockwise to the stop.
Note: the blender has a safety locking mechanism (5).
Therefore, it will not work if the blender jug (3) or lid
(2)
lock is incorrectly positioned. If this happens re-
position the blender jug (3). Make sure that the
blender handle is opposite the safety locking
mechanism (5).
2. Put food and liquid into the blender (e.g. milk for milkshakes and
strawberries). Make sure that the quantity of food does not
exceed the maximum mark on the jug measuring scale.
3. Fit the blender lid (2) tightly by turning it clockwise so that the
catch on the lid matches the slot in the blender handle. Put on
the small blender lid (1). Always put on the small blender lid (1)
before you start using the blender.
4. Plug the blender in.
5. Set the required speed by turning the speed regulator (8) on
the blender base (6) or use «Pulse» mode (7) for brief opera-
tion.
6. To add ingredients to the blender jug (3) while using it, turn off
the blender by turning the speed regulator (8) to 0 position,
wait until the engine stops, unplug the blender, open the small
lid (1) and add food through the hole in the lid. To continue
processing, re-place the small lid (1) plug the blender in and set
the required speed by turning the speed regulator (8).
7. Turn off and unplug the blender to stop using it.