AASTRA BluStar 8000i User Guide EN - Manual (Page 54)

Application Menu
49 41-001389-00 Rev 02 – 04.2012
To Configure Auto Answer:
To Configure the Transmit rate
:
To Configure Layout Options:
To Configure Call Forward Settings:
Terminal Identity
Please contact your system administrator for assistance with information entered in the terminal identity fields.
1. Touch the auto answer button.
2. Select either:
• instantly
• after 1-10 rings
Note:
If you select “off” you wont be able to configure auto answer for “if in call or conference” or “if in call with non BluStar
device”.
3. Touch the if in call or conference button.
4. Select either:
• decline new call and remain in old call
• conference new call into old call
• answer new call and disconnect old call
• answer new call and put old call on hold
5. Touch the if in call with non BluStar device button.
Note:
Not available in SIP Call Server Mode.
6. Select either:
• answer new call and disconnect old call
• decline new call and remain in old call
7. If you don't have to configure anything else on the screen, touch done.
1. Touch the max transmit rate button.
2. Select one of the options (e.g., Default).
3. Touch the non BluStar device transmit rate button (e.g., Default (786)).
4. If you don't have to configure anything else on the screen, touch done.
1. Touch or untouch the button beside “preserve video width”.
2. If you don't have to configure anything else on the screen, touch done.
1. Touch the no answer field to enter in the forwarding number using the on screen keyboard.
2. Touch the After 1 ring button to select how many rings you want to wait until the phone forwards the call.
3. Touch the all field to enter in the forwarding SIP URL or number using the on-screen keyboard.
4. Touch the busy field to enter in the forwarding SIP URL or number using the on-screen keyboard.
5. If you don't have to configure anything else on the screen, touch done.
6. In the telephone feature controls, make sure the forward button is selected.