AASTRA BluStar 8000i User Guide EN - Manual (Page 59)

Application Menu
41-001389-00 Rev 02 – 04.2012 54
To Configure Microsoft Exchange Contacts
1. Touch the use Microsoft Exchange personal contacts button.
Note:
When you select this option you wont be able to access your personal contacts that have been set up by your admin-
istrator.
2. Enter your Microsoft Exchange email address. For example, “[email protected]”.
3. Enter the Microsoft Exchange server name or IP address. For example, “mail.acme.com”.
4. Select use login credentials if your BluStar 8000i user name and password is the same as your Microsoft Exchange
user name and password.
OR keep this option unselected and manually enter in your Microsoft Exchange username, (optional) domain, and
password.
5. Select use SSL (Secure Sockets Layer) if you want to ensure that you have secure communications over the Internet.
6. Touch the test button to test the configuration.
If the configuration is successful, there will be a green check mark above the test button (see image above).
If the test failed, you will see an error message similar to the ones below.
If you see an error message, go back and re-enter the fields with the correct information.