AASTRA DT390 for MX-ONE User Guide EN - Manual (Page 33)

C ORDLESS P HONE FOR MX-ONE™
33 1424-EN/LZT 103 087 Uen F2 2012-03-02
6.3 Ending a Call
If you want to end an ongoing call, you hang up:
• Press .
The display shows the duration of the call. The total time of the call
can also be retrieved from the Calls menu, see Call Statistics on
page 81.
6.4 Parallel Ringing
Parallel ringing makes it possible for an incoming call to ring several
phones simultaneously and for the call to be answered from any of the
phones. The main advantage of this function is minimizing the risk of
losing calls. The function requires all the phones involved to be defined
in a parallel ringing list, which must be configured and initiated by the
system administrator.
Because only calls to a main extension will be distributed among the
phones in the list, this main extension also needs to be defined. A call to
a specific extension will not be distributed to other phones in the list. The
user can disable parallel ringing temporarily using the function Internal
Follow-me. For more information about Internal Follow-me, see Internal
Follow-me on page 60.
6.4.1 Disabling Parallel Ringing Temporarily
To disable parallel ringing temporarily, do the following:
1. Press *21*
Note: U.K., press *2*.
2. Dial the extension number, press # and press .
Wait for the call timer to start in the display.
3. Press to finish the procedure.
If you want to disable parallel ringing for all phones defined in the list,
follow the procedure for disabling the function from the phone with the
main extension number and enter the number of the answering position.
If you want to disable parallel ringing for one specific phone in the list
only, follow the procedure for disabling the function from this phone and
enter its extension number.