AASTRA DT390 for MX-ONE User Guide EN - Manual (Page 55)

C ORDLESS P HONE FOR MX-ONE™
55 1424-EN/LZT 103 087 Uen F2 2012-03-02
To transfer an ongoing call to another extension, do the following:
1. Press More, select New call and press Select.
2. Dial the third party and press .
You can dial the number, or use the phonebook or the call list to
make the call.
3. Press More, select Transfer, and press Select.
The ongoing call is transferred.
Note: If Transfer does not appear when you press More, you can also
do the following to transfer a call: Press R, dial the third party, and
press
before or after the third party answers.
10.7 Blind Transfer
With the blind transfer feature, you can transfer a call directly to a third
party, without having to wait for a ring tone when you dial the third party
number. When the transfer is complete, you will be disconnected.
Note: This feature needs to be configured in the WinPDM or CPDM3.
Please contact the system administrator.
To transfer an ongoing call to a number that cannot be retrieved, do the
following:
1. Press More, select Transf. to new and press Select.
Note: If Transf. to new does not appear when you press More, you can
also do the following to transfer a call: Press R, dial the third
party, and press
before the third party answers.
2. Dial the third party, and press .
10.8 Call Parking (On Hold)
An ongoing call can be put on hold temporarily. Calls put on hold can be
resumed to your own or on another phone.
To put a call on hold, do the following:
1. Press R.
Wait for a dial tone.