AASTRA DT390 for MX-ONE User Guide EN - Manual (Page 90)

1424-EN/LZT 103 087 Uen F2 2012-03-02 90
S ETTINGS
7. Press Back to save the setting.
16.4.5 Changing PIN Code
To change PIN code, do the following:
1. Press Menu, select , and press Select.
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Change PIN code and press Select.
5. Enter the old PIN code (default is 0000) and press OK.
6. Enter the new PIN code.
7. Enter the new PIN code again to confirm and press Save.
The following message is displayed: New PIN code saved.
16.5 Changing the Owner ID
The Owner ID is set to identify the phone. To change the owner ID, do
the following:
1. Press Menu, select , and press Select.
2. Select Owner ID, and press Select.
3. Enter a name and press Save to save the setting.
16.6 Changing Answering Methods
The phone can be set to answer a call automatically when a headset is
used, or to answer a call by a press on any key.
You can also change the answering behavior to:
• use Loudspeaking directly when is pressed.
• automatically connect incoming call in Loudspeaking mode,
without pressing any key.
16.6.1 Normal Answering
The answering behavior is set to Hook-off by default. You can set it to
any key by doing the following: