1 resuming a call, 2 resuming a call on another extension, 9 answering a call waiting call – AASTRA DT390 for MX-ONE User Guide EN User Manual

Page 56: 1 putting the ongoing call on hold

Advertising
background image

1424-EN/LZT 103 087 Uen F2 2012-03-02

56

D

URING

C

ALLS

10.8.1 Resuming

a

Call

To resume the call, do the following:

1.

Press

within 30 seconds.

If not resumed within 30 seconds you will be called back. An unanswered
external call will be rerouted to the operator after another 30 seconds.

10.8.2

Resuming a Call on Another Extension

To resume the call on another extension:

1.

Call the extension where the call was put on hold and press

.

2.

Press 8.

Note: France and New Zealand, press 4; Sweden, press 6.

10.9

Answering a Call Waiting Call

If you hear the call waiting tone during an ongoing conversation, another
person is trying to contact you.

Note: If call waiting is not enabled for your extension, you will continue

to receive a busy tone.

Before you answer a call waiting call, you can either terminate the
ongoing call on put it hold. Both methods are described below.

10.9.1

Putting the Ongoing Call On Hold

To put the ongoing call on hold and answer the waiting call, do the
following:

1.

Press R.

The ongoing call is put on hold and your phone rings to announce
the waiting call.

Note: R is default for this function. If this soft key is reprogrammed to

something other than R, this function is disabled.

2.

Press

to finish the call.

Wait for the system to recall the first party.

Advertising