AASTRA DT390 for MX-ONE User Guide EN - Manual (Page 93)

C ORDLESS P HONE FOR MX-ONE™
93 1424-EN/LZT 103 087 Uen F2 2012-03-02
moving them up or down in the list. It is also possible to get priority infor-
mation by selecting Info.
1. Press Menu, select , and press Select.
2. Select System, and press Select.
3. Select Priority, and press Select.
4. Change the priority if needed by selecting Up or Down.
5. Press Back to save.
16.8.2 Subscribing To a New System
The cordless phone can subscribe to up to 8 different cordless systems.
To subscribe a new system, you will need the Portable Access Right Key
(PARK) and Authentication code (AC) related to the system you are
going to logon to. To retrieve this information, contact the system admin-
istrator.
Note: The PARK code may not be needed if there is no alien DECT
system within the coverage area.
To subscribe to a new system, do the following:
1. Press Menu, select , and press Select.
2. Select Systems, and press Select.
3. Select Subscribe, and press Select.
4. Enter the system nameand press Next (optional) If no system
name is entered, the default name will be used.
5. Enter the PARK code.
6. Enter the AC code (between 4-8 digits) and press Next.
The following message is displayed: Protection on?
7. Select Yes, if the new system is to be protected, or No if the new
system is not to be protected.
Note: It is not possible to delete a protected subscription.
8. Press OK.
A searching mode starts.
16.8.3 Unsubscribing From a System
To unsubscribe from a system, do the following:
1. Press Menu, select , and press Select.