AASTRA 630d for Aastra 400 User Guide EN - Manual (Page 20)

Dialling and phoning
20
eud-1292/1.0 – R1.0 – 01.2011
Using a headset
To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset.
Note:
If you loose the radio contact with a Bluetooth headset, you can go back into the
radio area without being disconnected from the active connection.
Your phone is ringing. To answer the call, proceed as follows:
Press the Call key or Loudspeaker key.
➔
The call is provided on your headset.
Press the Loudspeaker key.
➔
The phone’s microphone is switched on and the headset microphone is
switched off.
Headset <--> Handset
You can use the Headset or Handset softkey to switch modes.
Ending a call:
Press the End key.
Notes:
• To find out how to activate the headset, refer to the Chapter
"To activate
headset mode" , page 75 .
• To find out how to connect a Bluetooth headset, refer to Chapter "Activating
Bluetooth mode and Bluetooth devices" , page 75 .
• To call a user, dial the user’s phone number and press the Call key or Loud-
speaker key.
• For more information refer to your headset’s user’s guide.