AASTRA 630d for Aastra 400 User Guide EN - Manual (Page 93)

Installation and first-time operation
eud-1292/1.0 – R1.0 – 01.2011
93
Battery
Take also note of the safety information on handling the battery set out in Chap-
ter
"Dealing with batteries" , page 10 .
Inserting the battery
1. Undo the two screws on the back of the phone with a suitable tool (e.g. coin) and
remove the cover.
2. Insert the battery with the contacts downwards, close the battery compartment
with the cover and screw them together with an appropriate tool.
3. Do not damage the rubber seal during assembly.
Charging the battery
The batteries are supplied uncharged. To charge the batteries, place the phone in the
charging bay.
It is only after the battery has been charged for the first time that your phone is ready
for use, that calls can be answered and that you can make calls from the phone.
Notes:
• It takes several charging cycles before a new battery reaches full capacity.
• The technical data can be found in the Chapter
"Technical data" , page 98 .
• The descriptions of the display symbols can be found in the Chapter "Display sym-
bols" , page 6 .