AASTRA 6755i User Guide EN - Manual (Page 108)

Line Keys, Programmable Keys, and Softkeys
101
41-001386-00 REV01 – 06.2013
Speeddial/Conf
The 6755i allows you to configure a softkey or programmable key or expansion module key to be used as a speed dial
conference key (Speeddial/Conf key) while remaining in the current call. This key allows a user on a call to conference
another party at a pre-defined number while remaining in the call.
For example, while on an active call, a user can use the Speeddial/Conf key to dial a recording service and have the result-
ing conference recorded.
If you configure a softkey or programmable key or expansion module key as a Speeddial/Conf key and you press this
key while on an active call, the focused line changes to the dialing line. A Cancel softkey displays on the phone allowing
you to abort the conference speed dial if required. The message "Ringing..." displays below the number when the far end
is ringing. The message "Conf. Unavailable" briefly displays when a conference is already in progress. The active call is not
put on hold when the speed dial number is dialed.
Configuring a Speeddial/Conf Key
16. In the “Line” field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 9
17. Click Save Settings.
Note:
If currently in a conference, the Speeddial/Conf key is disabled on the active call.
Note:
This feature is not compatible with centralized conferencing.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Speeddial/Conf.
4. In the "Label" field, enter a label for the Speeddial/Conf key.