AASTRA 6755i User Guide EN - Manual (Page 136)

Handling Calls
129
41-001386-00 REV01 – 06.2013
Using Local Conferencing in Live Dial Mode
Use the following procedure to create a conference call using local conferencing in live dial mode.
Joining Two Active Calls in a Single Conference
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf key. You should hear a dial tone before dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are not able to edit the destination number as the phone will either match the inputted number to a dial plan
or wait for the set digit timeout.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
1. Begin with active calls on two different lines (for example, Line 1 and Line 2 have active calls).
2. Press the Line key for which you want to conference the two calls together (for example, Line 1).
3. Press the Conf key.
4. Press the Line key that has the second active call (for example, Line 2).
5. Press the Conf key. The two active calls link into a conference call on Line 1.
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
L1 John Doe
Dial
1
.
4161234567
2. 4299
More
Cancel