AASTRA 6755i User Guide EN - Manual (Page 39)

Customizing Your Phone
41-001386-00 REV01 – 06.2013
32
Set Audio
The "Set Audio" option on the IP Phone allows you to set the audio mode for your IP phone. It also allows you to set the
volume level of the headset microphone and enable/disable DHSG. You can set Audio on your IP phone using the IP
Phone UI only.
Audio Mode
The 6755i allows you to use a handset, a headset, or handsfree mode to handle incoming and outgoing calls. The audio
mode option provides different combinations of these three methods to provide maximum flexibility in handling calls.
There are four audio mode options you can set:
Headset Mic Volume
The "Headset Mic Volume" option allows you to set the volume level for the headset microphone.
DHSG
The “DHSG” option allows you to enable or disable DHSG headset support.
Setting Audio Mode, Headset Mic Volume, and DHSG
Audio Mode Option Description
Speaker This is the default setting. Calls can be made or received using the handset or handsfree
speakerphone. In handset audio mode, pressing the button on the phone switches to
handsfree speakerphone. In Speaker audio mode, lift the handset to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset or headset. Calls
can be switched from the handset to headset by pressing the button on the phone. To
switch from the headset to the handset, lift the handset.
Speaker/Headset
Incoming calls are sent to the handsfree speakerphone first when the button is
pressed. By pressing the button again, you can switch back and forth between the handsfree
speakerphone and the headset. At anytime, lifting the handset switches back to the handset
from either the handsfree speakerphone or the headset.
Headset/Speaker Incoming calls are sent to the headset first when the button is pressed. By pressing
the button again, you can switch back and forth between the headset and the handsfree
speakerphone. At anytime, lifting the handset switches back to the handset from either the
headset or the handsfree speakerphone.
Note:
A DHSG headset and an expansion module cannot be used concurrently as they both share the same headset port.
IP Phone UI
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Set Audio.