EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 16)

XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
Issue 1.0
15
STATUS AREA:
The aim of this area is to check the hardware validity, the remaining
capacity of disks and to verify the compatibility between the software, the
drivers and the data recorded.
The system automatically starts the test processing. One after the other,
the different stages of the boot sequence are displayed in the Status
window.
If an error occurs during one stage, write the message down and contact
EVS staff for support.
The last test is the connection to the XNet. If this stage is successful, the
XFile is ready to operate. Press ‘START’ again to enter the application.