EVS Xfile Version 1.11 - April 2007 User Manual User Manual
Page 62
XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
Issue 1.0
61
2. then change the display of the XNet list to find one location. Select the
location to publish the clip(s) in the page, the bank and the camera
selection.
3. press
(SchedulePublish) to initiate the transfer of the selected clip.
4. select other clips froma the XFile list and repeat the operation.
5.. and then press
(UpdatePublish) to update the clips on the XNet.
Important Note: The UpdatePublish command will disconnect the
XFile from the XNet and then re-connect the XFile to the XNet. During
this operation, the Multicam database is updated with the new publish
list of the XFile.
¨
The
command will stop the current playbacks of XFILE clips
without prior notice
¨
The
command will make ‘unavailable’ the XFILE clips included into
a playlist without prior notice.
MULTI-SELECTION FOR PUBLISH
1. Press SHIFT or CTRL and select a batch of clips from the XFile list or
press CTRL + A to select all the clips displayed in the XFile list.
2.. Change the display of the list to find one location and select the first
location to publish the clips
3. Press
to open the following window: