EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 46)

XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
Issue 1.0
45
Clipnames
Clicking on the icon on the right side opens the following dialog box:
'Filter based on Prefix' allows defining a quick filter based on the first
character or first-second-… character of a clipname. The system adds
automatically a "*" sign while adding a prefix in order to mark the prefix
out from the clipnames in the filter list.
At start-up all clipnames assigned to the clips are extracted from the MXF
files and are listed in the 'Filter based on existing Clipname' field.
Select a clipname from the list and press 'Add' to fill out the filter list.
Note 1: The number of clipnames/prefix in the list is restricted to 5 items.
Note 2: The filter mode is not selectable
In the Filter list, select an item and press ‘Remove selected’ to cancel the
selection of this clipname.
Press 'OK' to confirm your selection and to quit the dialog box. The new
clipnames appear in the filter field.