EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 22)

XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
Issue 1.0
21
2. Then set the ‘DEFAULT XFILE’ parameter in the Setup menu of your
LSM-XT server. (see Multicam documentation for complete information).
The
label appears on the line of the LSM-XT server if the
‘DEFAULT XFILE’ has been correctly defined.
3. and then activate the AUTOBACKUP by pressing the
button.
Note : The ‘DEFAULT XFILE’ setting allows the operator to initiate the
backup of a clip from the LSM-XT server via the >ARCHIVE command
(see Multicam documentation for details.)
The ‘Archive Flag’ also initiates the backup of a clip as requested
by the >ARCHIVE command even if the ‘DEFAULT XFILE’ is not set.
But the Archive status on the Multicam server is not updated.
TIME RANGE
The autobackup session can be defined for a specific duration.
Select the square to activate the time range filter and press one of the
Time range selection button to access this window: