EVS Xfile Version 1.11 - April 2007 User Manual - Manual (Page 19)

Issue 1.0 XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
18
STORAGE AREA
Disk mode: (Single Disk / Dual Disk / Mirroring)
Single Disk: only one disk is used.
Dual Disk: When the first disk is full, the system automatically switches to
the second disk.
Mirroring: Same clips are saved to both disks at the same time.
Path A / B:
Selects the destination to save the MXF files. Depending on the Disk
mode selection, one or two paths is/are active for modifications.
Important Note: At start-up, only the clips saved into the Path(s) are
scanned. This means only those clips, data included, will be
accessible and display in the XFile list.
To avoid long scanning process at start-up, we advise the clips to be
distributed over different paths.
SYSTEM AREA
Serial Number:
The serial number of the system is defined during the first installshield
process and cannot be modified afterwards. The S/N is also written on the
back plate of the mainframe.