Restore mode – EVS Xfile Version 1.11 - April 2007 User Manual User Manual
Page 57
Advertising
![background image](/manuals/254277/57/background.png)
Issue 1.0
XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
56
Restore mode
Press
to enter the Restore mode.
The XFile can also be used as a security backup. Clips can be restored
from the XFile to any other server (XT6U, XT4U, SpotBox or AirBox) on the
network.
Press the Restore button to activate the mode.
1. Select the clip from the XFile list
2. Select the server from the XNet list. To display the list of servers
present on the XNet, press
.
3. then change the display of the list to find one location. Select the
location to restore the clip in the page, the bank and the camera selection.
Advertising