Xnet list and xfile list – EVS Xfile Version 1.11 - April 2007 User Manual User Manual
Page 35
![background image](/manuals/254277/35/background.png)
Issue 1.0
XFILE Version 1.11 – User’s Manual
Author: M. Lothaire
34
Note: Other modes (backup, restore and maintenance) are also
available during autobackup: several modes can operate
simultaneously.
Thanks to the selection list, the autobackup process is an automatic and
self-operating system. When a clip is created on one of the selected
servers, a copy is automatically transferred to XFile. The XFile operates
with the lower priority on the network, this means that the normal
operations of others servers are not affected by the XFile activity.
If the cameras/systems selection needs to be modified, the autobackup
mode must be disabled before entering the Session Configuration window.
XNET LIST AND XFILE LIST
The main screen is divided into two areas: the XNet list which monitors the
XNet activity and the XFile list which displays the contents of the XFile
paths.