EVS IPDirector Version 5.6 - May 2009 Part 1 User's Manual - Manual (Page 106)

IPDirector Version 5.6 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment - – May 2009
Issue 5.6.D
95
To define a link between a PGM and a video display, proceed as follows:
1. Check the box in the Linked column
2. Select which video display device it is linked to from the drop down list in the
video display column.
The linked box can be checked without being linked to a Video Display. For
example, this is used when an external monitor is connected at your workstation.
Note
All these parameters are local to the IP Director workstation and must
be set independently on all IP Director Workstations using the Remote
Installer tool.
When a Player channel is linked to an IP Director, you can see it on the Title bar
of the Video Display panel.
4.2.4 S
ELECTING THE
A/V B
OARD IN THE
V
IDEO
D
ISPLAY
When you open the Video Display, you need to select the appropriate A/V board to
be able to view the channel associated to the board.
To select the appropriate A/V board in the Video Display window, proceed as
follows:
1. Right-click the Video Display window.
This opens a contextual menu that displays the names of the A/V board(s)
connected to the IP Director workstation.
2. From the contextual menu, select the A/V board linked to the Video Display
in the Remote Installer application.
3. With A/V boards other than AVH boards, a dialog box specific to the
selected board opens:
4. Select the audio and video settings in the dialog box and click.
The player channel will open in the Video Display window.