EVS IPDirector Version 5.6 - May 2009 Part 1 User's Manual - Manual (Page 43)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – May 2009
32
2.8.3 C
REATING
P
ROFILES
Creation of profiles and definition of the user fields to be present in each profile
will be done through the Profiles tab. These profiles could then be attributed to
clips, playlists or timelines.
When creating a log sheet profile, in the Logsheet Profiles tab, a profile for log
sheet user field and/or a profile for automatic keywords are selected from the
profiles created via the Profiles tab and a log sheet profile name is attributed.
H
OW TO
C
REATE A
N
EW
P
ROFILE
When you create a new profile, you will be able to choose available user fields
from an existing list and/or to define new user fields.
To create a new profile, proceed as follows:
1. In the main IPDirector window, select the menu Metadata > Profiles
Management.
The Metadata Profiles Management window opens.
2. In the Profiles tab, do one of the following:
• in the File Menu, select New
OR
• right-click in the profile list and select New from the contextual menu.
The New Profile window opens. See section ‘New Profile Window’ on page
33.
3. Enter a profile name and, if required, a description for the profile.
4. Associate user fields to your profile. You may want to
• Select available user fields in the Available User Fields area either
o
by selecting the user field and then clicking the blue right arrow
o
or by double-clicking the user field
o
or by dragging it onto the Selected User Fields area at the position
where you want to drop it.
• Add new user field. To do this:
1. Click the Add New User Field button. The Add New User Field
window opens.