10 how to associate channels in pgm/prv mode, 8 how to gang recorder or player channels, 10 h – EVS IPDirector Version 5.6 - May 2009 Part 1 User's Manual User Manual
Page 95: Pgm/prv, Ow to, Ssociate, Hannels in
Issue 5.6.D
IPDirector Version 5.6 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – May 2009
84
3.3.10 H
OW TO
A
SSOCIATE
C
HANNELS IN
PGM/PRV
M
ODE
This mode allows you to play several clips ‘back to back’, with transition effects.
When playing single clips, the next clip can be selected on the PRV channel and a
TAKE button is present and active on the designated PGM control panel in this
mode, to allow the clip that is selected on PRV to be transitioned to manually.
When running a playlist, this mode provides the PRV channel that is necessary for
using transitions.
Please refer to the section on PGM-PRV settings in the Control Panel chapter for
a detailed description of the available settings for this mode.
At least 2 player channels must be available to define this association.
To associate channels in PGM/PRV mode, proceed as follows:
1.
Select two channels with SHIFT+click or CTRL+click.
2.
Right-click one of the selected channels and click Pgm/Prv.
OR
press
+
.
3.
The channels are now shown with the PGM
and PRV
icons: