Input gpis settings – EVS IPDirector Version 5.6 - May 2009 Part 1 User's Manual User Manual
Page 75
Issue 5.6.D
IPDirector Version 5.6 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – May 2009
64
•
from Output GPIs to Input GPIs: the configuration of the last 4 Output GPIs is
cleared.
•
from Input GPIs to Output GPIs: a message will warn the user that the TTL GPIs
may be used as Intput GPIs in in playlist, playlist macro command or timeline
macro command.
I
NPUT
GPI
S
S
ETTINGS
The Input GPIs settings make it possible to configure the action to be triggered on
a given player channel of the XT[2] server when a given key is pressed on a GPI
connected to this XT[2] server.
Up to eight GPI inputs can be used on an XT[2] server.
For each Input GPI, the following information needs to be defined:
•
the action triggered by the GPI key on the XT[2] server.
•
the player channel on which the action needs to be executed.
•
the type of trigger signal sent by the GPI to XT[2] server.