13 assigning your shuttlepro to a channel, 11 how to associate channels in fill & key mode, 13 a – EVS IPDirector Version 5.6 - May 2009 Part 1 User's Manual User Manual
Page 98: Ssigning, Huttle, Hannel
Advertising
IPDirector Version 5.6 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment - – May 2009
Issue 5.6.D
87
3.3.13 A
SSIGNING
Y
OUR
S
HUTTLE
PRO
TO A
C
HANNEL
You can assign your ShuttlePRO controller to one of the channels in Channel
Explorer. To do that, proceed as follows:
1.
Press the ‘Select Player’ key on the ShuttlePRO controller.
2.
The list of available channels appears:
3.
Use the jog dial to move through the list and highlight the required channel.
4.
Press the Select Player button again to select and exit the menu.
5.
The ShuttlePRO icon appears next to the channel that is now linked to the
controller.
Note
Refer to the ShuttlePRO section of the manual for more information on
the operation of the controller.
Advertising