8 how to gang recorder or player channels, 5 how to lock a channel, 6 how to unlock a channel – EVS IPDirector Version 5.6 - May 2009 Part 1 User's Manual User Manual
Page 93: Ow to, Ecorder or, Layer, Hannels
Issue 5.6.D
IPDirector Version 5.6 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – May 2009
82
3.3.8 H
OW TO
G
ANG
R
ECORDER OR
P
LAYER
C
HANNELS
When channels are ganged, they can be controlled simultaneously from the same
interface: the ganged control panel. It can be opened by double-clicking one of
the ganged channels. Refer to the Control Panel chapter for more information.
Note
It is not possible to gang recorder and player channels.
It is not possible to gang channels that already belong to different gang
groups.
To gang 2 or more channels, proceed as follows:
1.
Select the channels with SHIFT+click or CTRL+click.
2.
Right-click one of the channels and click Gang.
OR
press
+
3.
The ganged channels will now have a
next to them to signify their new
status.
4.
To add more channels to a group: select all channels of the group and the
new channel, right-click and select Gang again.
You can have many different ganged channel groups with a number of channels
per group, performing different tasks on a production.